Product
The accuracy of the arbor and pilot decides the flatness and finish of the machined face. These holders are ground on the features that carry that responsibility.
Best for
Face milling and surface machining on machining centres
You send
Holder code, cutter bore, spindle interface and cutter diameter
You get back
Holders with taper and arbor ground for concentricity
How it starts
Gauge length checked against fixture clearance
The situation
A face mill amplifies every error in the mounting, because the cutting edges are furthest from the spindle centreline.
What you get
Holders that mount face mills, shell mills and surface cutters to the spindle.
The machine interface, tool interface and working envelope are checked before manufacture, so holders arrive ready to run.
Supplied from range where a standard suits the job, made to order where it does not, or reproduced from your sample where the original is unavailable.
Locating and clamping features are ground and the dimensions governing runout and repeatability are inspected before dispatch.
Repeat orders and modifications are handled in Bengaluru rather than through an import cycle.
These holder families mount face mills, shell mills and surface cutters to the machine spindle, carrying the cutter on an arbor or pilot with drive keys. Their accuracy is what the flatness and finish of the machined face ultimately rests on.
Arbor and pilot sizes matched to common cutter bores, with BT, ISO and CAT spindle interfaces. The verified code and size table follows CMTA's confirmation.
Match the spindle taper, the cutter bore and drive key arrangement, and the gauge length needed to clear the fixture.
Alloy steel, hardened, with taper and arbor ground for concentricity and face runout checked.
Before you enquire
The inputs that make a useful review, plus the related pages worth reading first.
FAQ
The questions engineers and buyers ask before sending a drawing. If yours is not here, ask it directly — you will get an engineer's answer, not a brochure.
Still have a question?
Talk to Anita M.N, Managing Partner, or send the drawing and let the review answer it.
Holder code, Cutter type and bore or arbor size, Spindle interface, Cutter diameter, Application and material. If you are unsure of any of these, send a photograph of the current holder and the machine nameplate — that is usually enough for us to confirm the rest.
Yes. Variations in length, reach, interface, clamping or tool size are manufactured to order. Fully custom variants go through the custom tool holder process, with a drawing approved by you before manufacture.
Against three things: the machine interface, the tool interface and the working envelope. Where an existing item is being replaced, matching it to your sample or original part number is the most reliable route of all.
Yes. A drawing is manufactured to its stated tolerances; a sample is measured and reverse engineered into a drawing for your approval, and then manufactured.
Start a project
Share what you are trying to make or fix. Our engineering team reviews every enquiry and responds with the questions that matter, a feasibility view and next steps.
